EN 10217-7 1.4301, 1.4307, 1.4404 Welded Tube DONGSHANG Stainless produce welded stainless. This document (EN 10217-7:2014) has been prepared by Technical Committee ECISS/TC 110 Steel tubes, and iron and steel fittings, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text o
EN 10217-7 2005 is the material standard for stainless steel for welded tubes for pressure purposes. This new standard was first published in February 2005. This Part of this European Standard specifies the technical delivery conditions in two test categories for welded tubes of circular cross-section made of austenitic and austenitic-ferritic. EN 10217-1 Non-alloy steel tubes with specified room temperature properties. EN 10217-2 Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties. EN 10217-3 Alloy fine grain steel tubes. EN 10217-4 Electric welded non-alloy steel tubes with specified low temperature properties
EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes: EN 10217-7: 2005 Welded steel tubes for pressure purposes. Stainless steel tubes: EN 10296-2: 2005 Welded circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery condition The nickel content for grade EN 10217-1 Steel line pipes is now harmonised at 8.0/10.5 in line with other standards. It had been 8.00/10.00 in the 2005 version.The pipes are manufactured with the diameters between 17,2 - 2020 mm and with the wall thickness of up to 17,5 mm as spiral or longitudinal welded pipes
din en 10357 e : 2014 : austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry: 09/30172965 dc : 0 : bs en iso 13628-15 - petroleum and natural gas industries - design and operation of subsea production systems - part 15: subsea structures and manifolds: uni en iso 13628-15 : 201 BS EN 10217-7:2014 covers welded stainless steel tubes used for circular cross-sections made of austenitic and austenitic-ferritic stainless steel. These will be for use in pressurised systems requiring corrosion resistance at either room temperature, low temperatures or elevated temperatures DIN EN 10217-1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature propertie
Specifications: ASME / ASTM A249 / A 269 / A270 / A2554 / A312 / EN 10217-7, Equivalent to EN & DIN Standards: O.D: 12.70 mm to 406.40 mm: N.B: 3/8 - 1 A-688, A-778, A-789, IS 13316:92, EN 10217-7 & Its Equivalent ASME, DIN & EN Standard 4. 5 'U' Tubes In addition to the production of Straight Stainless Steel Tubes, Shubhlaxmi Manufactures 'U' Tubes for use in Heat Exchanger, Condensors, Pre-Heaters & Various other equipments ASTM A-312, A-554, A-778 & Its Equivalent ASME, DIN & EN Standard: TUBES: 6.35 mm To 102 mm OD: 0.50 mm TO 7.0 mm: ASTM A-249, A-268, A-269, A-270, A-554, A-688, A-778, IS 13316:92, EN 10217-7 & Its Equivalent ASME, DIN & EN Standar Exactly. Refer to EN ISO 1127 (see my 1st reply). For the material standard of pipe n tube, you can also refer to e.g. EN 10216-5 (smls aust SS) or 10217-7 (wldd aust SS), but theyre not similar to B36.1x, since they specify chemical, mechanical etc requirements. EN ISO 1127 is the most approximate EN equivalent for B36.1x Steel Comparison Chart. ASTM A240: Si < 0.75% N: ASTM A240, ASTM A182 ASTM A312: Ni 11 - 14% (10 - 14% for welded pipes
There are 77 equivalent materials for DIN 1.4432 Stainless Steel. See the equivalents for ASTM, AFNOR, BS, AISI, SAE, JIS, EN, GOST and UNS The European equivalent to ASTM A 240 (ASME SA 240) is BS EN 10028-7 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES PART 7: STAINLESS STEELS. There is also a DIN version of this standard DIN EN 10028-7. The equivalent grade to Type 316L is X2CrNiMo17-12-2 (1.4404) Mentioned terms of steel tubes are in standard EN 10079 or others (ISO 6929). Tube classification goes out several aspects: mode of produc-tion, cross section shape, tube ends treatment, sphere of tube usage. According to EN 10079 tubes rank among so-called long prod-ucts. It is a product having permanent circular or another hollo
EN 10216-5 EN 10216-5 EN 10217-7 EN 10222-5 EN 10222-5 EN 10250-4 EN 10263-5 EN 10264-4 EN 10264-4 EN 10269 EN 10269 EN 10270-3 EN 10272 EN 10296-2 EN 10297-2 EN 10302 EN 10312 Reference data on some physical properties are given in Tables A.1 to A.8. NOTE 1 A matrix that shows. About our service. EQUIMETALS can provide exact chemical composition, mechanical properties in several states, heat treatment procedures for various purposes, as well as detailed corrosion information for over 70 corrosive mediums in several combinations of concentration and temperature.. EQUIMETALS can also offer you close equivalent and similar steels from different countries, and provide. EN 10220. Table 2 of EN 10220 contains dimensions for heavy wall tubes, that are not covered by ISO 4200:1991. All parts of the European Standard series EN 10305 on steel tubes for precision applications contain tables with preferred dimensions, that are specific for the various parts of the standards series and the products and fields o
Citizen Pipes - We are manufacturer & suppliers of 6x1, 0 mm AISI 304 EN 10217-7 Welded Pipe, Govt of India recognised supplier of SS 304 Pipe,Tube. Get free sample & latest price List / aisi 304 en 10217-7 sch 5 / 10 / 40 / 80 / EN 10217-7 - European Standards / Welded Pipe / astm equivalent / stainless steel dimensions / standard / bs en 10217-7 Download the Spec Sheet PDF Hygienic Stainless Steels stock a full range of hygienic tubes according to EN 10357/EN 10217- 7 (formally DIN 11850) in 304 & 316L stainless steel. Typical finishes include: polished OD and unpolished ID. Unpolished OD and ID is also available. Polished tube is supplied in plastic sleeves with capped ends to protect the tube and the OD finish. We can supply un.
EN 10312 welded stainless steel tube shall be manufactured from stainless steel strip, we use automatic TIG welding type forming longitudinally welded, as welded condition, solution annealed can be offed for option. EN 10217-7 1.4301, 1.4307, 1.4404 Welded Tube. Share On. Email Us Standard: GB 30813 Equivalent Standards: EN 10217-7: Material: 06Cr19Ni10 Equivalent Material: 08Ch18N10, X5CrNi18-10, 1.4301: Chemistry Compositio Description: Stainless steel tubes Tubes DIN EN 10217-7 Kieselmann1.4301 / ASI 304 1.4307 / AISI 304L 1.4404 / AISI 316L others on request Product-contacting surfaces Average roughness value Ra < 0.8 µm Weld seam area Ra < 1.6 µmEN 10217-7 1.4301, 1.4307, 1.4404 Welded Tube EN 10217-7 Welded Circular Austenitic Stainless St. DIN EN 10088-3 (09/2005) stainless steels.Technical delivery conditions for semi-finished products,bars,rods,wire selection and bright products of corrosion resisting steels for general and construction purposes: DIN EN 10217-7: Welded steel pipes under compression load Pipes made from stainless steel: DIN EN 10297-2 (02/2006
Calculation code: ASME B31.3/A312 EN 13480-3/EN 10217-7 Welding factor: 0.8 (single butt seam) 1.0 Welding factor: 0.85 (double butt seam) 1.0 Wall thickness tolerance: -12,5% 10% Materials: TP 304L EN 1.4307 Design stress: 115 N/mm² 121 N/mm The hardness is equivalent to: max. 180 hV according to Din en iSO 6507-1 max. 90 hrB according to Din en iSO 6508-1 DIN EN 10217-7 / 10216-5 mit einer Länge von 5900 - 6090 mm (max. 10% Kurzlängen von min. 3000 mm möglich) Bei elektropolierten rohren mit Außendurchmesser ≤ 5,00 mm, beträgt die Länge 2950 ± 50 mm Citizen Pipes - We are manufacturer & suppliers of 8x0, 80 mm AISI 304 EN 10217-7 Welded Pipe, Govt of India recognised supplier of SS 304 Pipe,Tube. Get free sample & latest price List / aisi 304 en 10217-7 sch 5 / 10 / 40 / 80 / EN 10217-7 - European Standards / Welded Pipe / astm equivalent / stainless steel dimensions / standard / bs en 10217-7
W (welded) - made of welded pipes acc. to EN 10217-7: cold reshaped (pressed or drawn) solution annealed: pickled surface: Material: 1.4307/304L - 1.4541 - 1.4571 - 1.4404/316L: Certificate acc. to EN 10204/3.
SIS-EN-10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tube EN 10217-7 annealed. ASTM A312 annealed. EN 10217-7 unannealed. EN 10296-2 unannealed. EN 10357 BC H2 annealed. EN 10357 BC H3 EHEDG annealed. ASTM A270 3A annealed. DIN 11850 CC unannealed. EN 10357 H3 DIN 11866 A/B/C. H3-H4-H5 ASTM A270/269. ASME BPE SFT1/SFT4. All available in: 304L 316L 1.4307 1.4404 All available in: 304, 304L, 316 316 EN 10217-7: Welded steel tubes for pressure purposes - Stainless steel tubes : EN 10296-2: Welded circular steel tubes for mechanical and general engineering purposes - Stainless Steel tubes: ASTM A182 / ASME SA-182 : Forged or rolled alloy-steel pipe flanges, forged fittings etc. for high temperature service
China En 10217-7 1.4301, 1.4307, 1.4404, 1.4541, 1.4571, 1.4462 Stainless Steel Welded Pipe, Find details about China Stainless Steel Pipes, En 10217-7 Steel Pipe. EN 10216-2, Quality P235 GH (formerly DIN 17175, St.35.8 Cl. 1, boiler pipe) P = Pressure 235 = minimum yield strength in N/mm2 GH = tested properties at higher temperatures; EN 10216-3, Quality P355 N (more or less equivalent to DIN 1629, St.52.0) P = Pressure 355 = minimum yield strength in N/mm2 N = normalized EN 10002-5, Metallic materials - Tensile testing - Part 5: Method of testing (at elevated temperature). EN 10020, Definitions and classification of grades of steel. EN 10021, General technical delivery requirements for steel and iron products. EN 10027-1, Designation systems for steels - Part 1 : Steel names, principle symbols.
1.4550. UK B.S. BS EN 10028-7 BS EN 10088-1 BS EN 10088-2 BS EN 10088-3 BS EN 10088-5 BS EN 10216-5 (2004) BS EN 10217-7 BS EN 10222-5 BS EN 10250-4 BS EN 10253-3 BS EN 10253-4 BS EN 10272 BS EN 10296-2 (2005) BS EN 10297-2 (2005) 1.4550 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and Mechanical. X6CrNiNb18-10. UK B.S. BS EN 10028-7 BS EN 10088-1 BS EN 10088-2 BS EN 10088-3 BS EN 10088-5 BS EN 10216-5 (2004) BS EN 10217-7 BS EN 10222-5 BS EN 10250-4 BS EN 10253-3 BS EN 10253-4 BS EN 10272 BS EN 10296-2 (2005) BS EN 10297-2 (2005) X6CrNiNb18-10 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel and. EN or other standards may cover products sold. It is reasonable to expect specifications in these standards to be similar but not necessarily identical to those given in this datasheet. Stainless steel grade 316Ti contains a small amount of titanium. Titanium content is typically only around 0.5%. The titanium atoms stabilise the structure of th
Grades C Si Mn P S Cr Ni Mo Ti Cu Other; ACX 150 =0.030 =0.75 =2.00 =0.040 =0.015: 17.50-19.00: 8.00-10.00----ACX 160 =0.030 =0.75 =2.00 =0.040 =0.015: 18.00-19.00: 8. 1.4462, DIN, DIN EN 10088-1, Stainless steels - Part 1: List of stainless steels, DIN EN 10272, Stainless steel bars for pressure purposes, DIN EN 10222-5, Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels, DIN EN 10250-4, Open die steel forgings for general engineering purposes - Part 4: Stainless steels, DIN EN 10263-5, Steel rod.
Grades C Si Mn P S Cr Ni Mo Ti Cu Other; ACX 240 =0.030 =0.75 =2.00 =0.040 =0.030: 16.00-18.00: 10.00-12.00: 2.00-2.50---ACX 332 =0.030 =0.75 =2.00 =0.040 =0.030: 16. EN 10052:1993, Vocabulary of heat treatment terms for ferrous products. EN 10088-1, Stainless steels - Part 1: List of stainless steels. EN 10204, Metallic products - Types of inspection documents. EN 10233, Metallic materials - Tubes - Flattening test. EN 10234, Metallic materials - Tubes - Drift expanding test Consulta la composición quÃmica y las propiedades fÃsicas de EN 10217-7 Grade X2CrNiN18-10 solution annealed (+AT), busca materiales alternativos y ponte en contacto con los proveedores Milton Metals - We are manufacturer & suppliers of 6x1, 0 mm AISI 304 EN 10217-7 Welded Pipe, Govt of India recognised supplier of SS 304 Pipe,Tube. Get free sample & latest price List / aisi 304 en 10217-7 sch 5 / 10 / 40 / 80 / EN 10217-7 - European Standards / Welded Pipe / astm equivalent / stainless steel dimensions / standard / bs en 10217-7